It is designed to show a large number of different variables and results on a clear backlit LCD display that can be mounted on the windscreen.

The display can be used to show velocity, distance, lap times, g-forces, temperatures, time between speeds and many more (see below) all in real time without the need for a laptop.

It is designed to show a large number of different variables and results on a clear backlit LCD display that can be mounted on the windscreen.

The display can be used to show velocity, distance, lap times, g-forces, temperatures, time between speeds and many more (see below) all in real time without the need for a laptop.

• Sats
• Time
• Latitude (degrees minutes seconds)
• Longitude (degrees minutes seconds)
• Velocity (speed over ground, kmh or mph)
• Vertical velocity (kmh or mph)
• Heading (degrees north)
• Height (meters or feet)
• Lateral acceleration (g)
• Longitudinal acceleration (g)
   

Brake test parameters

• Time between two speeds (s)
• Distance between two speeds (m or feet)
• Distance from brake trigger to rest (m or feet)
• Corrected distance (to nearest whole 5kmh/mph)
• Time from brake trigger to rest (s)
• Speed at which brake trigger is pressed (kmh or mph)
• MFDD
• Peak G
• Average G
   

• Time between two speeds (s)
• Time to set distance (1/4 mile, 400m etc)

Lap timing parameters (all 0.1s resolution)

• Last Lap time
• Best lap time
• Current time
• Last 20 lap times
• 6 Split times
• Velocity at end of lap (kmh or mph)
• Velocity at splits 1-6 (kmh or mph)

External module parameters

• 8 Temperatures from thermocouple module (degrees Celsius)
• 8 Voltages from analogue module (volts)
• Yaw rate (from CAN yaw rate sensor, degrees per second)
• Latacc (from CAN yaw rate sensor, g)