| VBOX II S | |
|
The VBOX II
S uses GPS to allow you to perform detailed analysis of Braking,
Accelerating, Handling and Circuit testing. The VBOX will fit to a car
in 30secs, and requires no setting up or calibration.
The system uses a survey grade 20Hz GPS engine, and utilises removable compact flash cards for storage. The VBOX
II S comes as a complete kit with all the accessories necessary to
begin testing immediately. This includes, VBOX II DGPS logging unit,
antenna, battery pack (6 hour), charger, serial cable, compact flash
card (32mbyte), PCMCIA compact flash adapter, VBOX Windows analysis
package, manual and padded carrying case. |
 |
|
The following parameters can be logged simultaneously at 20Hz: |
|
| Satellites | |
| Time | Heading (degrees true north) |
|
Latitude
(minutes) Longitude (minutes) Velocity over ground (kmh/mph) |
Height
(meters/feet) Vertical velocity (kph/mph) Distance (metres) |
| Lateral acceleration (g) | |
| Longitudinal acceleration (g) | |
| Outputs: | |
 |
RS232 (all parameters - 115200 baud) |
| CAN (all parameters - 1Mbit default) | |
|
Digital
(velocity 90 pulses per metre) Analogue (velocity 0-5v, scale 0-400kmh) Note: Values shown are defaults. The range of the Analogue and digital outputs are fully configurable via the VBOX Windows software. |
|
| Inputs: |
 |
|
Brake
trigger input (scanned at 200KHz) The VBOX can also be connected to a number of modules to measure external signals such as Analogue, Digital, Thermocouple, Frequency and CAN. There are two different types of display that can be used in the vehicle, see displays for more information. |
|
|
|
|
| The datasheet for the VBOX II DGPS is available from the here. | |
|
|
|
 |
 |
|
|
|
Tel: +44
(0)1451 822458
|