VBOX II DGPS 20Hz Datalogger
| The VBOX IISX uses GPS to allow you to perform
detailed analysis of Braking, Acclerating, Handling and Circuit
testing. The VBOX will fit to a car in 30s, and requires no setting
up or calibration. The system uses a survey grade 20Hz GPS engine,
and utilises removable SD cards for storage. For more detailed
information about the technology behind the VBOX, please go to
About the VBOX. |
 |
The VBOX IISX comes as a complete kit with all the accessories
necessary to begin testing immediately. This includes, VBOX IISX DGPS
logging unit, antenna, battery pack (6 hour) with built in 12V charger,
USB cable, SD card (64mbyte), VBOXTools Windows analysis package, manual
and padded carrying case.
Note: With the Base Station, and an
optional upgrade, the VBOXIISX can achieve a positional accuracy of just
20cm!
|
Log Channels
The following parameters can be logged simultaneously at 20Hz:
- Time
- Velocity over ground (kmh/mph)
- Lateral acceleration (g)
- Longitudinal acceleration (g)
- Heading (degrees true north)
- Distance (metres)
|
- Latitude (minutes)
- Longitude (minutes)
- Height (meters/feet)
- Vertical velocity (kmh/mph)
- Satellites
|
Outputs
|
 |
- Digital
Velocity 90 pulses per metre.
- CAN
All parameters - 1Mbit default.
- RS232
All parameters - 115200 baud.
- Analogue
Velocity 0-5v, scale 0-400kmh.
|
Note: Values shown are defaults. The range of the Analogue and
digital outputs are fully configurable via the VBOX Windows software.
There are two different types of display that can be used in the
vehicle, see displays for more information.
Inputs
- Brake Trigger
Scanned at 200kHz.
- Various Input Modules
The VBOX can also be connected to a number of external Racelogic
modules to measure external signals such as Analogue, Digital,
Thermocouple, Frequency and CAN. Racelogic also offer two inertial
input modules.
|

|

|