YAW02 Inertial Sensor
The Racelogic Yaw sensor with CAN and serial output houses a single axis MEMs Yaw rate sensor, and a twin axis G-sensor. The Yaw sensor can measure ±150º/s, and the accelerometers can measure ±1.7g. Inside there is also a temperature sensor.
Each Yaw rate sensor is calibrated on our stabilised turntable in an environmental chamber, so that a full temperature calibration is carried out from -20 to +50ºC. This gives the Yaw rate sensor a very high stability of less than 70º per hour.
This sensor can be used either directly connected to a VBOX, or it can also be used as a stand alone device, with the CAN output fully configurable by the end user.
